| Author |
Message |
|
Dago
Firing on two.
Joined: February 27th, 2009, 7:26 pm
Posts: 940
Location: Etelä-Savo, st Michel
|
 Re: 1987 2CV Bamboo toomany2cvs wrote: samfieldhouse wrote: I think you've done completely the right thing. Plus, I'm guessing you'd never have found an MOT'd, taxed and running AK350 for what you've paid for the shell. However, by your own admission, you have no sense  Russell wrote: If you had any sense, you wouldn't buy an AK350. You'd buy one of these:  <cough> I sold my Ami Super and kept the AK350... What's that say about me? Good man 350s are rare enough...
_________________
Pete.
Remember to smile!
|
| November 12th, 2009, 3:23 pm |
|
|
|
toomany2cvs
Firing on two.
Joined: December 26th, 2008, 9:40 pm
Posts: 3332
Location: Surrounded by 2cvs...
|
Re: 1987 2CV Bamboo Dago wrote: toomany2cvs wrote: <cough>
I sold my Ami Super and kept the AK350... What's that say about me? Good man 350s are rare enough... Especially Belgian M4-powered ones. Mind you, Ami Supers aren't exactly thick on the ground... I _suspect_ there's probably more 350s than Supers in the UK.
_________________
Zookeeper of a miscellany of motorised silliness - from 0.75bhp to 9ft tall - now living life on the road in an old VW.
http://WhereverTheRoadGoes.com
|
| November 12th, 2009, 3:26 pm |
 
|
|
|
Dago
Firing on two.
Joined: February 27th, 2009, 7:26 pm
Posts: 940
Location: Etelä-Savo, st Michel
|
Re: 1987 2CV Bamboo Yeah, i know. Both rare and i just want to have them... Had 350. Had. 
_________________
Pete.
Remember to smile!
|
| November 12th, 2009, 10:01 pm |
|
|
|
Russell
Firing on two.
Joined: November 29th, 2008, 10:05 pm
Posts: 9259
Location: West Sussex, U.K.
|
Re: 1987 2CV Bamboo The first parts are coming off the old Bamboo tomorrow, as certain bits have been sold. Shame to see it gone, it'd have been nice to show it off a bit more before breaking it up, but I'm hoping it's going to be worth it.
I'm really hoping to make it something cool, and really low...
_________________
samfieldhouse wrote: What I like about I2F is that there is no pretence of democracy.
|
| November 22nd, 2009, 11:41 pm |
|
|
|
hjbharry
Firing on two.
Joined: May 1st, 2009, 11:36 pm
Posts: 856
Location: hertfordshire
|
Re: 1987 2CV Bamboo  i made mine lower today the exhausts are mm's not inches of the floor now!!
_________________
Low and Loud!
|
| November 23rd, 2009, 12:07 am |
|
|
|
Dago
Firing on two.
Joined: February 27th, 2009, 7:26 pm
Posts: 940
Location: Etelä-Savo, st Michel
|
Re: 1987 2CV Bamboo Russell wrote: The first parts are coming off the old Bamboo tomorrow, as certain bits have been sold. Shame to see it gone, it'd have been nice to show it off a bit more before breaking it up, but I'm hoping it's going to be worth it.
I'm really hoping to make it something cool, and really low... I agree. Just loved it the way you had it. But time for everething. I´m sure you will do a COOL car. I´m very anxious to see the progress of it.
_________________
Pete.
Remember to smile!
|
| November 27th, 2009, 10:20 pm |
|
|
|
Russell
Firing on two.
Joined: November 29th, 2008, 10:05 pm
Posts: 9259
Location: West Sussex, U.K.
|
Re: 1987 2CV Bamboo I didn't buy the van, and the Bamboo is in the garage, rusting away. It still looks cool but I think it's run out of Tax or MoT or insurance or something, anyway, I was thinking of getting it out this weekend, but I'm sure I stopped driving it for a reason, and I know the roof doesn't really work any more. Meh.
_________________
samfieldhouse wrote: What I like about I2F is that there is no pretence of democracy.
|
| February 5th, 2010, 7:36 pm |
|
|
|
Tim2cv
gym bunny
Joined: December 8th, 2008, 4:08 pm
Posts: 806
Location: Burton-upon-Trent
|
Re: 1987 2CV Bamboo i loved the bamboo... suited you so well and that little bit different! 
_________________
1299cc FTW
|
| February 5th, 2010, 7:51 pm |
|
|
|
Russell
Firing on two.
Joined: November 29th, 2008, 10:05 pm
Posts: 9259
Location: West Sussex, U.K.
|
Re: 1987 2CV Bamboo It's a right dog though (unless you want to buy it, in which case it's one of the nicest 2cv around, and is priced appropriately) and needs loads of little jobs doing. maybe i should spend tomorrow actually doing some of those jobs. Anybody want to buy me 4 wings and a roof? or weld a back panel in it? No? ah go on?
_________________
samfieldhouse wrote: What I like about I2F is that there is no pretence of democracy.
|
| February 5th, 2010, 8:04 pm |
|
|
|
Dago
Firing on two.
Joined: February 27th, 2009, 7:26 pm
Posts: 940
Location: Etelä-Savo, st Michel
|
Re: 1987 2CV Bamboo What´s wrong with the wings?
_________________
Pete.
Remember to smile!
|
| February 5th, 2010, 8:40 pm |
|
|
Who is online |
Users browsing this forum: No registered users and 39 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
