and you can cut a cheap clamp so it fits in the slotted holes to get it all tight
| International2cvFriends.com http://international2cvfriends.com/forum/ |
|
| Windscreen panel replacement http://international2cvfriends.com/forum/viewtopic.php?f=7&t=2965 |
Page 1 of 1 |
| Author: | Darvie43 [ April 30th, 2011, 6:37 am ] |
| Post subject: | Windscreen panel replacement |
I have bought a new windscreen panel,drilled out the old spot welds and removed the old rusty panel. A freind has oxy,tig and mig,what would be the best way to attach the new panel,the sides concern me the most. Darvie |
|
| Author: | Russell [ April 30th, 2011, 7:35 am ] |
| Post subject: | Re: Windscreen panel replacement |
Drill out some neat 5mm holes where the spotwelds were on the panel you removed and plug them with mig weld. You're better off doing it with a spotwelder though. If he's a wizard with the tig then that might be a neater option. |
|
| Author: | Sean [ April 30th, 2011, 8:11 am ] |
| Post subject: | Re: Windscreen panel replacement |
and you can cut a cheap clamp so it fits in the slotted holes to get it all tight
|
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|