International2cvFriends.com
http://international2cvfriends.com/forum/

Clutch cable adjuster thread
http://international2cvfriends.com/forum/viewtopic.php?f=7&t=2642		 Page 1 of 2
Author:  Rhythm Thief [ January 28th, 2011, 7:16 pm ]
Post subject:  Clutch cable adjuster thread
Anyone know what thread the adjuster barrel on the clutch cable is?
Author:  james2cv [ January 28th, 2011, 7:47 pm ]
Post subject:  Re: Clutch cable adjuster thread
Might be completely wrong but I think one is 22mm the other 19?
Author:  Rhythm Thief [ January 28th, 2011, 7:49 pm ]
Post subject:  Re: Clutch cable adjuster thread
You are wrong - they're 19mm and 16mm - and it's the thread I'm after, not the spanner size. But thanks anyway. :lol:
Author:  james2cv [ January 28th, 2011, 8:00 pm ]
Post subject:  Re: Clutch cable adjuster thread
LOL. This is what happens when you know literally feck all about anything vaguely mechanical, and then think you actually do.
Author:  Sean [ January 28th, 2011, 9:14 pm ]
Post subject:  Re: Clutch cable adjuster thread
M12x 1.0 I think
Author:  ken [ January 28th, 2011, 10:27 pm ]
Post subject:  Re: Clutch cable adjuster thread
That's the one...

Are you in need of a nut, RT? ;)

Sean wrote:
M12x 1.0 I think
Author:  Rhythm Thief [ January 29th, 2011, 12:10 pm ]
Post subject:  Re: Clutch cable adjuster thread
Yes, sort of ... wot I'm trying to do is extend the adjuster barrel because it's the easiest way of extending the cable outer to make an Ami 8 cable fit an Ami 6 with the old type pedal assembly. I've done this by cutting an adjusted off an old cable, but now I need some kind of arrangement to hold it all together.
... I'll post some pictures when I get chance. They're so much better than words. :)
Author:  Rhythm Thief [ January 29th, 2011, 12:18 pm ]
Post subject:  Re: Clutch cable adjuster thread
I suppose I should really have titled this "clutch cable adjuster thread thread". :lol:
Author:  Russell [ January 29th, 2011, 12:19 pm ]
Post subject:  Re: Clutch cable adjuster thread
I reckon you may be best off buying an Ami8 pedal box. You'd be able to do away with that wafty crank thing I made for the throttle linkage too. Not sure if the master cylinder would fit though.
Author:  Sean [ January 29th, 2011, 3:24 pm ]
Post subject:  Re: Clutch cable adjuster thread
Rhythm Thief wrote:
Yes, sort of ... wot I'm trying to do is extend the adjuster barrel because it's the easiest way of extending the cable outer to make an Ami 8 cable fit an Ami 6 with the old type pedal assembly. I've done this by cutting an adjusted off an old cable, but now I need some kind of arrangement to hold it all together.
... I'll post some pictures when I get chance. They're so much better than words. :)


weld a gearbox mount spacer on the bulkhead or just use cable tension to keep it there?

adjust by adding some seatbelt anchor spacers?

Sean
Page 1 of 2 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/