International2cvFriends.com http://international2cvfriends.com/forum/ |
|
widscreen repair http://international2cvfriends.com/forum/viewtopic.php?f=7&t=2416 |
Page 1 of 1 |
Author: | Sean [ November 6th, 2010, 3:39 pm ] |
Post subject: | widscreen repair |
argentinian windscreen repair panel .....not the best fit another problem is that the holes that were originally there to give access to the spot welder contacts. The new panel doesn't. So in the new spirit of caring&sharing heres my tip The flange welds will have to be plugged but for that you need a good tight contact ![]() the top hole has way too much gap so i modified a cheap C clamp (£5 a set from lidle or aldi) ![]() perfect! ![]() now just wait till the rain stops Sean |
Author: | 602 [ November 6th, 2010, 3:46 pm ] |
Post subject: | Re: widscreen repair |
Is that a whole panel including the bonnet hinge or just the side panels? [Can't tell from the pics] |
Author: | Sean [ November 6th, 2010, 3:55 pm ] |
Post subject: | Re: widscreen repair |
602 wrote: Is that a whole panel including the bonnet hinge or just the side panels? [Can't tell from the pics] its the whole thing seam below hinge to roof bar crossmember thingy....where the mirror hangs ![]() ![]() Sean |
Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |