International2cvFriends.com
http://international2cvfriends.com/forum/

fuse related questions
http://international2cvfriends.com/forum/viewtopic.php?f=7&t=2398		 Page 1 of 1
Author:  J-dub [ November 3rd, 2010, 7:10 pm ]
Post subject:  fuse related questions
right, so im replacing the old fuse box with nice modern miniblade fuses, as i had a problem the other day, dodgy connection, and the wipers parked up and refused to work as ddi indicators,
i also have tons of fuse holders and mini blad fuses, no citroen fuse box type ones though,

now, assuming i have the fux box the right way up, could anyone tell me what each wire does? i plan on labelling it with the dymao thing so i know for future reference when a fuse blows!
Author:  J-dub [ November 3rd, 2010, 7:13 pm ]
Post subject:  Re: fuse related questions
also if posisble what size they are?? i know i can work it out so dont worry if not but please say if you do
Author:  ken [ November 4th, 2010, 1:35 pm ]
Post subject:  Re: fuse related questions
James,
this any good?

< http://www.flickr.com/photos/30132857@N06/4179544634/ >

10 amp fuses for everything except the circuit feeding the voltage regulator, wiper motor, etc.

Re. that problem you've got with a headlamp bulb, sounds as though a filament is broken and making intermittent contact.
Replacement is your best option...

ken
Author:  J-dub [ November 4th, 2010, 1:52 pm ]
Post subject:  Re: fuse related questions
Thanks ken, will do. Done fuse holders, will replace bulb :-)
Author:  twofifty AZU [ November 4th, 2010, 1:56 pm ]
Post subject:  Re: fuse related questions
Also check the resistance between the headlight bowl and the chassis. The path back to earth goes through a lot of joints on the factory setup. Quite often I add an earth wire into the factory headlight bar loom. I like the headlights as bright as possible.
Page 1 of 1 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/