| International2cvFriends.com http://international2cvfriends.com/forum/ |
|
| Earth Fault with hazzards and indicators http://international2cvfriends.com/forum/viewtopic.php?f=7&t=1632 |
Page 1 of 1 |
| Author: | Tim2cv [ April 27th, 2010, 8:45 pm ] |
| Post subject: | Earth Fault with hazzards and indicators |
Hi, I am struggling with an earth fault. My indicators work but my hazzards dont. The green flasher light is always dimly lit when the engine is running but if i remove the wire from th pin marked red there is no earth fault but no indicators or hazzards.  I dont really know where to start looking. The indicators work well and flash brightly. When the hazzard switch is pressed the light goes bright then off. I have tried more than 1 switch. Any ideas please? |
|
| Author: | Chris 2cv [ April 27th, 2010, 8:52 pm ] |
| Post subject: | Re: Earth Fault with hazzards and indicators |
This sounds like the problem I had with mine after rebuilding it turned out to be the flasher unit was gash!!!!! |
|
| Author: | Tim2cv [ April 27th, 2010, 9:01 pm ] |
| Post subject: | Re: Earth Fault with hazzards and indicators |
oh, its a new flasher relay too! one of the plastic Ecas jobs with the earth wire? |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|