Of coarse it is...
Paul Narramore wrote:
M10x1.5 pitch ISO Metric Course thread.
| International2cvFriends.com http://international2cvfriends.com/forum/ |
|
| Wing Mirror attachment Bolt/screw http://international2cvfriends.com/forum/viewtopic.php?f=7&t=1541 |
Page 1 of 1 |
| Author: | bertiewhite [ March 31st, 2010, 2:30 pm ] |
| Post subject: | Wing Mirror attachment Bolt/screw |
Can anybody tell me what kind/size of thread the attachment bolt is please? I have a pair of 2CV mirrors that I want to attach to the Bedouin doors and I have the big bolts together with the internal screw that fits from the other side of the door but I need to fabricate an internal nut/plate arrangement to fix it to. |
|
| Author: | Paul Narramore [ March 31st, 2010, 4:18 pm ] |
| Post subject: | Re: Wing Mirror attachment Bolt/screw |
M10x1.5 pitch ISO Metric Course thread. |
|
| Author: | ken [ March 31st, 2010, 4:43 pm ] |
| Post subject: | Re: Wing Mirror attachment Bolt/screw |
Of coarse it is... Paul Narramore wrote: M10x1.5 pitch ISO Metric Course thread. |
|
| Author: | bertiewhite [ March 31st, 2010, 6:27 pm ] |
| Post subject: | Re: Wing Mirror attachment Bolt/screw |
Thanks gents |
|
| Author: | ken [ March 31st, 2010, 7:20 pm ] |
| Post subject: | Re: Wing Mirror attachment Bolt/screw |
Bertie, went a bit off-topic there, but couldn't resist it. Anyhow, now that I've finished sorting that engine and found a door mirror screw, it would appear that they're 1.25 pitch. Don't you have any thread gauges in that workshop? Or is all that hitech flying gear still using Whitworth and tpi...  ken. bertiewhite wrote: Thanks gents |
|
| Author: | Sean [ March 31st, 2010, 7:32 pm ] |
| Post subject: | Re: Wing Mirror attachment Bolt/screw |
( and if you dont have a screw gauge and neither does the RAF.. dont let Ken know but just open the box of taps, find one that has the same pitch, lay along side the screw like a screw gauge to check- it should mesh perfick, and then read the tap... our little secret  )
|
|
| Author: | bertiewhite [ March 31st, 2010, 8:01 pm ] |
| Post subject: | Re: Wing Mirror attachment Bolt/screw |
Ken, Sean - I took a wander down to our General Workshop stores this morning and they let me look through what they had but either they were out of stock or nothing fitted, metric or otherwise. Now I know what pitch they are I can ask in my hardware store. |
|
| Author: | Paul Narramore [ March 31st, 2010, 8:27 pm ] |
| Post subject: | Re: Wing Mirror attachment Bolt/screw |
OK then, pardon me for speaking. It's an M10x1.25 pitch ISO Metric PHYNE thread then? No, I couldn't find my thread gauges either but I guess they would have been in TPIs. |
|
| Author: | Jonathan [ March 31st, 2010, 9:43 pm ] |
| Post subject: | Re: Wing Mirror attachment Bolt/screw |
Do you mean something like this?....... http://www.ecas2cvparts.co.uk/triangula ... -1201.html |
|
| Author: | bertiewhite [ April 1st, 2010, 1:27 am ] |
| Post subject: | Re: Wing Mirror attachment Bolt/screw |
Jonathan wrote: Do you mean something like this?....... http://www.ecas2cvparts.co.uk/triangula ... -1201.html I didn't realise it's a part and might end up ordering a couple but I'd have to adapt them anyway & could easily make one if I had the nuts!! |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|