nice idea! I've seen the red Grolsch bottle top seals used for the same purpose.
| International2cvFriends.com http://international2cvfriends.com/forum/ |
|
| Keeping water out http://international2cvfriends.com/forum/viewtopic.php?f=7&t=1417 |
Page 1 of 1 |
| Author: | 2CViking [ March 4th, 2010, 1:49 pm ] |
| Post subject: | Keeping water out |
We all know that water can drip on the dash and some of the water is coming through the wiper spindles. Here is a way to eliminate water by fitting old dust caps from the wheel brake cylinders. Attachment: P3040001.jpg |
|
| Author: | Neil [ March 4th, 2010, 8:24 pm ] |
| Post subject: | Re: Keeping water out |
nice idea! I've seen the red Grolsch bottle top seals used for the same purpose.
|
|
| Author: | George [ March 6th, 2010, 8:16 pm ] |
| Post subject: | Re: Keeping water out |
cheers 2cviking took your advice, but i used some from Mini brakes as wev got mountains of mini scrap  
|
|
| Author: | 2CViking [ March 6th, 2010, 9:12 pm ] |
| Post subject: | Re: Keeping water out |
I hope it works, our 2cv doesn't drip water after fitting the dust covers. Are yours the right way or should they turn around? |
|
| Author: | George [ March 6th, 2010, 11:24 pm ] |
| Post subject: | Re: Keeping water out |
well there mini ones so there abit bigger and when i put them on like normal they didn't hold down so i had to stretch them over the bolt that hold the arm down, so they snug much better  but as you can see from the paint work the rain may be getting in through some of the rust 
|
|
| Author: | Dago [ March 7th, 2010, 12:50 pm ] |
| Post subject: | Re: Keeping water out |
Nice. Have to do that some time. |
|
| Page 1 of 1 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|