International2cvFriends.com
http://international2cvfriends.com/forum/

Rust Rot Excessive
http://international2cvfriends.com/forum/viewtopic.php?f=5&t=6366		 Page 1 of 3
Author:  subarupete [ May 26th, 2021, 2:01 pm ]
Post subject:  Rust Rot Excessive
Got myself a refurb body shell as the current item is very tired.

Now to cut a big hole in the lower bulkhead for the prop shaft :)

Old Body Shell....
Low bulkhead and boot and the following.
Attachment:
P1000923.jpeg
P1000923.jpeg [ 306.58 KiB | Viewed 111023 times ]

Attachment:
P1000926.jpeg
P1000926.jpeg [ 308.98 KiB | Viewed 111023 times ]

Attachment:
P1000922.jpeg
P1000922.jpeg [ 262.93 KiB | Viewed 111023 times ]

Attachment:
P1000921.jpeg
P1000921.jpeg [ 252.96 KiB | Viewed 111023 times ]

Attachment:
P1000928.jpeg
P1000928.jpeg [ 318.61 KiB | Viewed 111023 times ]


Attachments:
P1000926.jpeg
P1000926.jpeg [ 308.98 KiB | Viewed 111023 times ]
Author:  subarupete [ May 29th, 2021, 2:25 pm ]
Post subject:  Re: Rust Rot Excessive
Markout the GOOD metal to be removed...:)

Attachment:
a.jpg
a.jpg [ 918.67 KiB | Viewed 110964 times ]
Author:  subarupete [ May 30th, 2021, 12:03 pm ]
Post subject:  Re: Rust Rot Excessive
Added some good Zintec to the hole with some average welds

Attachment:
z.jpg
z.jpg [ 687.39 KiB | Viewed 110941 times ]
Author:  rob massey55 [ May 31st, 2021, 6:26 pm ]
Post subject:  Re: Rust Rot Excessive
all good stuff Pete, Ive been excavating some of the rusty stuff as well. :)
Author:  subarupete [ June 4th, 2021, 10:11 am ]
Post subject:  Re: Rust Rot Excessive
Yet another large hole, this time in the boot.

Attachment:
P1010011.jpeg
P1010011.jpeg [ 316.91 KiB | Viewed 110841 times ]
Author:  AZL57 [ June 4th, 2021, 4:25 pm ]
Post subject:  Re: Rust Rot Excessive
The holes have an advantage, they won't rust... ;-)
Author:  subarupete [ June 4th, 2021, 4:43 pm ]
Post subject:  Re: Rust Rot Excessive
:lol: also less kg that is until it, gets filled in with more metal than was removed :(
Author:  rob massey55 [ June 6th, 2021, 10:06 pm ]
Post subject:  Re: Rust Rot Excessive
I can see that you've been paying attention :) .


AZL57 wrote:
The holes have an advantage, they won't rust... ;-)
Author:  Roger V [ June 7th, 2021, 6:10 pm ]
Post subject:  Re: Rust Rot Excessive
You have to let the rain water out some how!
Author:  subarupete [ June 9th, 2021, 4:48 pm ]
Post subject:  Re: Rust Rot Excessive
Covered with Primer and Seam Sealer looks reasonable :)
Added a kg or Two as the metal is 1.5mm where as the original is 1.2mm or less.

Attachment:
47B366CE-764D-4203-9B9B-0C14F910800E.jpeg
47B366CE-764D-4203-9B9B-0C14F910800E.jpeg [ 252.16 KiB | Viewed 110736 times ]
Page 1 of 3 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/