International2cvFriends.com
http://international2cvfriends.com/forum/

Viking's ''new'' six'er
http://international2cvfriends.com/forum/viewtopic.php?f=5&t=1808		 Page 1 of 2
Author:  2CViking [ June 7th, 2010, 11:02 am ]
Post subject:  Viking's ''new'' six'er
turtle wrote:
Got a new cool mask for the ami 6:

Image

Other than that, no real progress lately, been spending whatever little garage time I've had on my Harley WLA project..



Maybe we should begin a new Berline club.

Just got this 1963. She need plenty of hard work, long time project. Suddenly I need parts from our old green Ami 6 as this one is very rusted.

Attachment:
P6060426.JPG
P6060426.JPG [ 269.23 KiB | Viewed 6031 times ]


Attachment:
P6060427.JPG
P6060427.JPG [ 274.56 KiB | Viewed 6031 times ]


Attachment:
P6060439.JPG
P6060439.JPG [ 260.33 KiB | Viewed 6031 times ]


Look at the grill, very similar to the one posted here, very rare and unique.
Read here http://www.citromuseum.com/index.php?id=visiteami&L=1
Attachment:
P6060440.JPG
P6060440.JPG [ 266.36 KiB | Viewed 6031 times ]


Attachment:
P6060429.JPG
P6060429.JPG [ 261.19 KiB | Viewed 6019 times ]


Attachments:
P6060428.JPG
P6060428.JPG [ 275.54 KiB | Viewed 6031 times ]
Author:  2CViking [ June 7th, 2010, 11:06 am ]
Post subject:  Re: Viking's ''new'' six'er
Would love to buy a set of these? Any chance of getting the supplier please?

[quote="turtle]

New mirrors:
Image[/quote]
Author:  twofifty AZU [ June 7th, 2010, 2:11 pm ]
Post subject:  Re: Viking's ''new'' six'er
2CViking wrote:
Would love to buy a set of these? Any chance of getting the supplier please?

[quote="turtle]

New mirrors:
Image[/quote][/quote]


The last ones I bought were intended for a Peugeot 404/504 pickup. I think Der Franzose does them amongst others
Author:  2CViking [ June 7th, 2010, 2:20 pm ]
Post subject:  Re: Viking's ''new'' six'er
twofifty AZU wrote:
2CViking wrote:
Would love to buy a set of these? Any chance of getting the supplier please?

The last ones I bought were intended for a Peugeot 404/504 pickup. I think Der Franzose does them amongst others



Well done, sharing the knowledge.
Cheers

http://www.franzose.de/en/Peugeot/404/S ... iff=mirror
Author:  twofifty AZU [ June 7th, 2010, 2:27 pm ]
Post subject:  Re: Viking's ''new'' six'er
De nada

http://www.franzose.de/en/Peugeot/504-6 ... /ANR77300/

2CViking wrote:
twofifty AZU wrote:
2CViking wrote:
Would love to buy a set of these? Any chance of getting the supplier please?

The last ones I bought were intended for a Peugeot 404/504 pickup. I think Der Franzose does them amongst others



Well done, sharing the knowledge.
Cheers

http://www.franzose.de/en/Peugeot/404/S ... iff=mirror
Author:  Willami [ June 8th, 2010, 4:11 pm ]
Post subject:  Re: Viking's ''new'' six'er
Hi Viking

If you need a N/S (LHD) rear wing for your Berline - let me know

bought one in error for my Break

the gutter is all different for the Berlines

Will
Author:  2CViking [ June 8th, 2010, 5:00 pm ]
Post subject:  Re: Viking's ''new'' six'er
Willami wrote:
Hi Viking

If you need a N/S (LHD) rear wing for your Berline - let me know

bought one in error for my Break

the gutter is all different for the Berlines

Will


Thanks mate, I shall remember you if I need it.
Please PM your price. Don't worry about getting it to me, someone will eventually collect it. Where are you?
Author:  EirikJ [ June 8th, 2010, 5:08 pm ]
Post subject:  Re: Viking's ''new'' six'er
Willami wrote:
Hi Viking

If you need a N/S (LHD) rear wing for your Berline - let me know

bought one in error for my Break

the gutter is all different for the Berlines

Will


Really?! It seems like they are the same in the parts manual? Same number as far as I can understand.
Are you 100% sure they are not the same on Berline and Break?
Author:  Willami [ June 8th, 2010, 5:50 pm ]
Post subject:  Re: Viking's ''new'' six'er
EirikJ wrote:
Willami wrote:
Hi Viking

If you need a N/S (LHD) rear wing for your Berline - let me know

bought one in error for my Break

the gutter is all different for the Berlines

Will


Really?! It seems like they are the same in the parts manual? Same number as far as I can understand.
Are you 100% sure they are not the same on Berline and Break?


I know that the door came from a Berline and it doesn't match the Break doors on my September 1967 Break. I will take some photos when I can.

maybe this is from an earlier Break??

I do know that the door I have does not have the little 'soap dishes' on the inside, where you would put your hand to open from inside - that is terrible English Grammar!!!!! sorry!!!

photos shortly - let's get to the bootom of this??? it's fun to compare such minor details - NERDY

Willami
Author:  EirikJ [ June 8th, 2010, 6:25 pm ]
Post subject:  Re: Viking's ''new'' six'er
Maybe someone should put this AMI6 parts discussion in a separate thread....

Quote:
I do know that the door I have does not have the little 'soap dishes' on the inside, where you would put your hand to open from inside - that is terrible English Grammar!!!!! sorry!!!
photos shortly - let's get to the bootom of this??? it's fun to compare such minor details - NERDY


Well, it not nerdy wishing not to buy parts that doesn't fit! I have a AMI6 Break from summer -68 with aluminum window surrounds. Meaning they are detachable. I just bought a rear door for it. Don't know year of donor-car, but it must be before autumn -68, because it has aluminum window-frames. And it was a Berline, that I could see on the window-frame. But I took the window-frame off when I bought the door too save space in my 2CV. (Coming from a meeting) meaning to fit the windowframe and window from my old door(Break) on this new one.
Really hope the doors are the same :?

Here, have a photo of my newly bought door :)

Image

I've been searching for a rear left hand wing, believing they are the same on berline and break. If this is not so I hope I'll find out before getting one send't from a galaxy far far away :roll:
Page 1 of 2 All times are UTC + 1 hour [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/