| International2cvFriends.com http://international2cvfriends.com/forum/ |
|
| 2CV in Production Car Trial http://international2cvfriends.com/forum/viewtopic.php?f=4&t=5073 |
Page 1 of 2 |
| Author: | Rewind [ December 1st, 2013, 8:26 pm ] |
| Post subject: | 2CV in Production Car Trial |
Took my newly acquired 2CV D*lly in for its first Production Car Trial today, great fun, need some decent front tyres though to really get it going well off road. Thanks for Russ for a great car! Cheers, Les |
|
| Author: | Neil [ December 1st, 2013, 9:17 pm ] |
| Post subject: | Re: 2CV in Production Car Trial |
|
|
|
| Author: | Russell [ December 1st, 2013, 10:19 pm ] |
| Post subject: | Re: 2CV in Production Car Trial |
What Neil said! Glad it did well, I reckon putting pre-70s suspension on it would do the bizzo, it's super supple. What vehicles were you up against and where did you come? |
|
| Author: | Rewind [ December 3rd, 2013, 12:40 am ] |
| Post subject: | Re: 2CV in Production Car Trial |
Unfortunately I was too busy driving it to take pics. I'm hoping someone took some and if I get any I'll post them. Came pretty low down in the order (my first real trial apart from a brief outing in the 1931 Morris that I had), all the more experienced people there said that with the right tyres I would have done much better. I have been offered a pair of 165 15 Uniroyal Rallye 260 tyres which the guy reckons will fit the 2CV wheels and which are on the approved list for production car trials. They sound a bit wide to me, I'll check with my local tyre place as to whether these are practical to fit (if they did fit I'd probably buy a spare pair of wheels and use them only off road for the trials). Anyone have any experience on whether these might be persuaded to fit standard rims? Anyone have two spare wheels? I'm planning to campaign the car for the local club's PCT series next year so Sunday was really just getting a feel for what it was all about and seeing how the car performed. now where would I find some pre-70's suspension as Russ has suggested...? |
|
| Author: | Russell [ December 3rd, 2013, 1:28 am ] |
| Post subject: | Re: 2CV in Production Car Trial |
You can fit 165s but I doubt they would improve much, new 135s would probably be better. As for suspension, you want springs and four arms from something with batteurs, and do away with the telescopic dampers, at least, I reckon that'd give it the really nice soft supple suspension of the early cars that will just not stop regardless of ground conditions.* *All advice is just guesswork based loosely upon experience of abusing old cars. |
|
| Author: | lpgo [ December 3rd, 2013, 1:31 pm ] |
| Post subject: | Re: 2CV in Production Car Trial |
Put the front down as far as the terrain offers, and therear end as far up as possible in that way your front wheels have the maximum traction |
|
| Author: | Pony [ December 3rd, 2013, 10:13 pm ] |
| Post subject: | Re: 2CV in Production Car Trial |
Dont even think about 165 wide unless you want to fit a new diff!! or buy a Limited Slip Diff from me!! Max 155 wide will go OK on a normal rim Wide tyres do not always do what you think Thin with good tread is good soft suspension is good weight is most important Pony |
|
| Author: | ken [ December 3rd, 2013, 10:44 pm ] |
| Post subject: | Re: 2CV in Production Car Trial |
Soft suspension + long travel? Altering the bump and droop stop settings will give longer travel, but you need to be careful that the driveshaft inner and outer sections don't part company on full droop... |
|
| Author: | Rewind [ December 4th, 2013, 5:42 pm ] |
| Post subject: | Re: 2CV in Production Car Trial |
Thanks for all the advice, I have the winter to work on it so will consider some of the suggested mods. I found a pair of new 15 x 135 Uniroyal Rallye tyres so will have them by the weekend. Cheers, Les |
|
| Author: | ken [ December 4th, 2013, 9:35 pm ] |
| Post subject: | Re: 2CV in Production Car Trial |
Les, it might be worth checking the age of those Uniroyals, as it's quite a while since they stopped producing 2CV-size tyres. ken Rewind wrote: Thanks for all the advice, I have the winter to work on it so will consider some of the suggested mods. I found a pair of new 15 x 135 Uniroyal Rallye tyres so will have them by the weekend. Cheers, Les |
|
| Page 1 of 2 | All times are UTC + 1 hour [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|